The AT33Mono is made specifically for use on mono systems. . This is simply great for mono records produced from around 1965 onwards Like the recent Beatles boxed mono set. All the quality of the legendary 33 series has been handed over to this mono cartridge. ( 0.7mil Stylus )
0.7mil is suitable for reissue monaural LP and a monaural LP of after 1960.
1.0mil is suitable for the monaural LP of a deep groove of the first press of the 1950s.
However, both styli can trace the monaural LP of all generations without a problem.
When you listen to the monaural LP of all generations, we recommend 0.7mil.
When you listen to a monaural LP of the first press of the 1950s mainly, we recommend 1.0mil
The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally.
Mono cartridge compatible with stereo playback systems.
Elliptical stylus chip and hard duralumin cantilever.
10O middle impedance specification.
PCOCC coil prevents crystal gain boundary formation (in transmission direction).
Strong body stabilized by a rigid body set-up.
"Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
High-quality sound / Brass fastening screw.
*This model is not compatible with SP records.
Type: MC-type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10O1kHz
DC resistance: 10O
Load resistance: More than 100O(when head amp connected)
Coil impedance: 28µH (1kHz)
Static compliance: 20×10-6cm/dyne
Dynamic compliance: 6×10-6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
