The TRU-GLIDER is hand-made to your specification and available in two models.
From £4995 On Board model ( ) and Off Board model () plus an Off-Board Limited Edition in Brass ().

Two measurements are required for both OFF-BOARD & ON-BOARD models.
Height from placement board or plinth to the top of the platter.
Mounting distance from center spindle
A picture of your turntable would be helpful.

choice of 9, 10, 11, 12, 14" & 14.5" 

It is an easy pick to Nominate for the Writer's Choice Award for 2020. Get you one! Tone Audio

The only thing that the Tru-Glider does leave you with is the sheer enjoyment it pulls from your vinyl record collection. So if you're looking to invest in an extremely capable tonearm that you can bring with you on an analogue audio journey, I unreservedly recommend it.Stereonet

if you are just looking to make a serious improvement to your vinyl rig, you seriously need to examine the IntegrityHiFi Tru-Glider Pendulum Tonearm. I can think of no better upgrade than this piece. It very well could be the last tonearm you ever buy Postive Feedback

Customized Arm length (10, 11, 12 & 14inches )  & Height specific for your turntable.

Tru-Glider Pendulum floating stand alone tonearm. 

.
✅ No cables to buy
✅ No holes to drill
✅ No bearings
✅ No Unipivot
✅ No Azimuth
✅ No Antiskate
✅ No Friction
✅ No Setup Man
✅ No expensive Protractor to buy
✅ Zero Offset
✅ Swingheadshell included
✅ Special Tru-Lift included
✅ Arm Tested for 4 hours - pre pcking
✅ Terminated Direct Cardas wires
✅ easy to follow video instructions
✅ Live help on standby
✅ Transportable to another table
✅ Customized height
✅ Sound Dynamics

A Tonearm without bearing friction? 

A Tonearm without a Uni-Pivot? Impossible! 

You can never have an arm without friction! So You might think...

Up until now!

Introducing The TRU-GLIDER a revolutionary Tonearm that will offer superior sound reproduction but with Zero friction points. Our innovative design incorporate a straight zero offset with pendulum suspension meaning the arm is virtually weightless.

TRU-GLIDER Pendulum tonearm is suspended at a Single point by means of a very fine polyethylene, Dacron Monofilament. 

It doesn't rest on the pivot point. 

There's just enough clearance to control the arm movement. 

TRU-GLIDER is friction free and is made from the highest quality materials. It’s unique styling and operation speaks for itself.  Built-in Tru-lift is also used as the que device with a longer rail. 

TRU-GLIDER is a straight tonearm and therefore doesn't need anti-skate.  It works along the same principal as a Linear tracking tonearm but without friction or mounting.