Ortofon TA-210 Tonearm 12 Inch


Ortofon TA-210 Tonearm 12 Inch

Product no.: TA-210


can be shipped within 7 days

Ortofon TA-210 Tonearm 12 Inch
£1,295.00
Price includes VAT, plus delivery


Possible delivery methods: UK Tracked with Signature, UK Express, Airmail Tracked with Signature, UK Standard

The new Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. Our extensive knowledge of vibration properties and characteristics in different shapes and materials has been applied for optimization of TA-210 tonearm

 

#### £ 150 worth of Free Vinyl of Your Choice  ######

 

The TA-210 is given a precision machined slit in each end of the aluminum tube. A piece of Ortofon special vibration damping compound is integrated into each slit:he arm. Due to these two different materials an extended damping effect is obtained in the largest possible range.

Both inserts integrated in the tonearm tube are manufactured at the Ortofon technical facilities in Nakskov, Denmark.

 

In the uncrowded field of 12" tonearms, the Ortofon TA-210 has little competition—and none, save for the above-mentioned and enduringly recommendable Schick, at its end of the price scale. The TA-210 is well made and an excellent value -  Art Dudley Stereophile 

 

 

Hi-Fi World

 

Reviewed by Rafael Todes 

"The deck and combination has an attractive quality of making the midrange of the orchestra colours seem more intense and concentrated, as if you were listening in Technicolor!...

...The TA-210 has "an unusually clean vibrational spectrum...

...So although the TA-210 is a long and conventional looking arm under measurement it performs very well."

 

Features:

  • TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
  • TA-210 has a standard 5-pin DIN connector for tonearm cable
  • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
  • Counterweight with Inner/outer scale
    • Inner scale to be applied with main counterweight
    • Outer scale to be applied when extra mass ring is added
  • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
  • TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
  • Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
  • Extra mass ring weight 45g 

 

 

 

 

 

 

 

 
 

 

 

 

The counterweight should be attached onto the rear of the tonearm with the inner number scale facing forward.  If the extra mass ring is needed, it must be installed prior to attaching the counterweight to the tonearm.  The extra mass ring should be installed on the back of the counterweight and may need to be twisted slightly to facilitate the installation.  Ensure that the extra mass ring fits tightly to the thick part of the counterweight. 

 

TA-210 is the product with great benefits for the discerning analogue user

 

The TA-210 can ideally be combined with MC Windfeld , A90 , SPU & Xpression.

The combination of Xpression, ST-80 SE Transformer  and TA-210 gives a supreme experience! The hiend headshell LH-1000

incorporating damping technology similar to the TA-110/210 tonearms, will be a perfect interface between the tonearms and Ortofon Cadenza , MC Windfeld and MC A90.

 

 

 

#### £ 150 worth of Free Vinyl of Your Choice  ######

 

Browse this category: TONEARMS